Tips for better plate reads
Make the plate you want the biggest in view, check the text against the car, and know when to type it instead.
A few habits get you faster, cleaner reads with the ParkingNerd Operator app.
- Get close enough that the plate you want is the biggest plate on the screen.
- Hold the phone steady until it buzzes.
- Compare the plate on the card with the plate on the car.
- If it doesn't match, or the camera can't read it, type it instead.
The biggest plate wins
The app looks at the whole camera picture and reads the largest plate it can see. In a row of parked cars, other plates are often in view too. Step closer, or angle the phone, so the car you're checking has the biggest plate on the screen.
Check the text against the car
The app shows the plate exactly as it read it. It never swaps look-alike characters such as O and 0, I and 1, or B and 8 to "fix" a read. If a character on the card doesn't match the car, tap Scan next and either scan again or type the plate.
"State unknown" is normal
The state line on the card reads State unknown. The app reads the plate's letters and numbers, not which state issued it, so don't rely on it to tell you the state.
Reading the same car again
After you tap Scan next, the app won't read the same plate again until it has been out of view for 2 seconds. This stops it from reading the car you just checked over and over. To read it again on purpose, point the camera away for a moment, then back at the plate.
When to type instead
Type the plate when it's muddy, damaged, bent, partly covered, or hidden by glare, or when the camera keeps getting a character wrong. See Type a plate the camera can't read.
No signal?
Reading a plate happens on the phone, so the camera still reads plates where you have no signal. Checking them with ParkingNerd needs a connection. See Scanning with poor or no signal.
Related articles
Still stuck?
Ask your Owner or an Admin first. They set up the app for your lot. You can also email ParkingNerd support at [email protected].